you take one side…and peel it back 3 inches….
and snip off the underneath.. (luckily it’s blue so it make it easier to tell what it is in the pictures!)
so the backing is on all of it except for our 3 inch side…
then you carefully eyeball (or measure if you are a perfectionist!) and lay it flat.
you smooth it out and rub the side so it’s down flat!!!!!
then you very carefully… take up the other side that has the backing on it…and where you cut it, you slowly peel it up… i literally do about 2 inches at a time.
one hand is peeling the back..the other hand is smoothing out the front…
work slow. we don’t want bubbles! peel..stick..peel…stick…
pretty soon you have reached your end….and the vinyl piece is on perfectly smooth and centered.
Now…this project was done with a martha stewart punch. the above hello project was done by scissors and my hands…so vinyl isn’t only for people with electronic cutters…
my silhouette cameo is by far my most Favoritest thing on the planet…you might want to consider adding it to your christmas list. (you can go HERE to buy one!)
Leave a Reply